According to foreign media reports, on February 6, India's new energy and " were reported. This revision adds 3,058 megawatts of solar cell manufacturing capacity.
Among them, the Evervolt Solar Technology was added to the list for the first time with an installed capacity of 1074 MW. The company's production base is located in Tirupati District, Andhra Pradesh, India. The company uses a size of 182.2 mm X 182.
The selected solar cell model is EVT-M10-BR-PERC, with an average conversion efficiency of 23.10%, an average power of 7.66 watts, and an efficiency range of 22% to 23.50%. The power range is 7.26 watts to 7. The selection is valid from February 5, 2026 to February 4, 2030.
At the same time, Premier Energies was approved to add a new battery model. The new installed capacity is 1358 MW , the new model is TOPCon double-sided N-type solar cell, using G12R package, the size is 182.3 mm X 210 mm, and equipped with 16 bus bars. The average conversion efficiency is 25.37%, the average power is 9.71 watts, the efficiency range is 24% to 26%, and the power range is 9.18 watts to 9.
Mundra Solar PV (owned by Adani Group) has been approved to add a new battery model. The newly installed capacity is 405 MW , and the newly added TPRB16 model is a double-sided N-type TOPCon battery with a size of 182.3 mm X 210 mm, equipped with 16 bus bars, with an average conversion efficiency of 25.35% and an average power of 9.70 W. Efficiency ranges from 24.5% to 25.7%, and power ranges from 9.37 watts to 9.37 watts.
In addition , FS India Solar Ventures has been deemed eligible for inclusion in the ALMM solar cell list lI. The company, which was previously listed on the ALMM Solar 221 megawatts of new capacity to 3,433 megawatts.".
In September 2025, MNRE issued the second edition of the Revised Solar Cell Type Approval List and Manufacturer List II. An additional 4,813 megawatts of solar cell capacity has been added, with a total capacity of 17.
It is understood that India will implement the list from June 1 , 2026 in order to promote local photovoltaic manufacturing.
In addition to the battery sector, on September 12, 2025, MNRE also issued a draft amendment proposing the inclusion of solar wafers in the List of Approved Models and Manufacturers (ALMM).
It is worth noting that the mechanism will establish a separate ALMM List-III for silicon wafers with reference to the current component list ALMM List-I and the battery list ALMM List-II to be implemented in June 2026 .
According to the proposal, ALMM List-III for solar wafers will come into effect on June 1, 2028, provided that at least three independent wafer manufacturers are put into operation. And the total annual production capacity reaches 15GW .
In addition, in order to ensure the integration of upstream production, the draft amendment also stipulates that the listed silicon wafer manufacturers should have the capacity of silicon ingots matching the capacity of silicon wafers to be applied for.
浙公网安备33010802003254号