our newly released HI-MO X10 full-screen three-defense component is "full screen". From the appearance, we can see the obvious difference between it and conventional products, the so-called full screen, the most intuitive feeling is that the proportion of batteries in the components has increased significantly.
This full screen technology has fully optimized the unusable areas of the components: the bus bar in the middle, the bus bar at the end, the bus bar at the bottom, and the horizontal and vertical spacing between the cells have all been adjusted. We hide all the bus strips on the back of the module, and the distance between the cells meets the specifications of the secondary spacing, which not only reduces the gap between the upper and lower directions, but also optimizes the distance between the left and right cells through high-precision typesetting technology. On the premise that the overall size of the component remains unchanged at 1134 X 2382, the power is directly increased by nearly 20 watts compared with the conventional TOPCon component, which is the core value of the full screen technology.
The second core point is "full power generation": after the power is increased, the overall power generation of a single component will naturally increase synchronously.
Thirdly, we also introduced the low temperature welding technology this time. BC module has been developed for many years, and its core feature is that all the welding structures are on the back of the battery. The traditional process is to use a welding machine to directly weld the grid line and the battery together, which not only requires a high temperature environment, but also easily affects the reliability of the product due to the welding stress caused by high temperature. This time, we made the adhesive film and welding strip into an integrated structure, and completed the formation at one time in the laminating process, which not only reduced the processing temperature, but also greatly improved the positioning and control accuracy. This back low-temperature welding technology, on the one hand, reduces the temperature stress, on the other hand, optimizes the light utilization efficiency of the back through high-precision cutting, so that the double-sided rate of the component can reach up to 85%.
In addition, all the diodes of this product adopt laser welding process. Under the conventional process, if the diode and bus strap are not welded in place, it is easy to appear false welding, which is also the core cause of the burning problem of photovoltaic modules. After the introduction of laser welding, the reliability of welding has been greatly improved, which also makes this full-screen three-proof component add the core ability of anti-burning on the basis of the original three-proof, and then superimpose the advantage of anti-hot spot of BC component itself, finally forming a complete technical system of "full-screen, full-hair, full-three-proof".
浙公网安备33010802003254号